|
1.11, 1.12 |
Materials guided in centered position Type
|
SQUIX 4.3 M
|
4 MSQUIX
|
| Printing method: Thermal transfer |
 |
 |
 |
 |
| Direct thermal |
 |
 |
 |
- |
| Printable resolution dpi |
203 |
300 |
300 |
600 |
| Print speed mm/s max. |
300 |
300 |
300 |
150 |
| Print width mm max. |
104 |
108.4 |
105.7 |
105.7 |
| Initial print Distance to locating edge mm |
centered |
| Material |
| Paper, cardboard, synthetics PET, PE, PP, PI, PVC, PU, acrylate, Tyvec |
 |
| Direct thermal paper / cardboard |
 |
 |
 |
- |
| Shrink tubes ready for use |
 |
| continuous, pressed |
 |
| Textile tape |
 |
| Finishing Roll, fanfold |
 |
| Roll diameter mm max. |
205 |
| Core diameter mm |
38.1 - 76 |
| Winding |
outside or inside |
| Label Width mm |
4 - 110 |
| Height no label backfeed mm at least |
3 |
| label backfeed mm at least |
4 |
| label backfeed, peel-off mm at least |
6 |
| Thickness mm |
0.03 - 0.6 |
| Liner Width mm |
9 - 114 |
| Thickness mm |
0.03 - 0.16 |
| Continuous Width mm |
9 - 114 |
| Thickness mm |
0.03 - 0.50 |
| Weight (cardboard) g/m2 max. |
300 |
| Shrink tube Width ready for use mm max. |
114 |
| continuous, pressed mm |
4 - 85 |
| Thickness mm max. |
1.1 |
| Hose continuous, round or oval max. height mm |
5 |
| Ribbon Color layer |
outside or inside |
| Roll diameter mm max. |
80 |
| Core diameter mm |
25.4 |
| Length m max. |
600 |
| Width mm |
25 - 114 |
| Internal rewinder provided on peel-off units |
| Outside diameter mm max. |
142 |
| Core diameter mm |
40 |
| Winding |
outside |
| Printer dimensions, weights |
| Width x Height x Depth mm |
252 x 288 x 460 |
| Weight kg |
10 |
| Label sensors, position indicators |
| Transmissive sensor detecting |
labels, punch marks, materials ending, print marks on translucent materials |
| Reflective sensor from below or top detecting |
labels, materials ending, print marks on non-translucent materials |
| Sensor distance to locating edge centered position mm |
0 - 55 |
| Material passage mm max. |
2 (5 are an option) |
| Interfaces |
| RS232C 1,200 to 230,400 baud/8 bit |
 |
| USB 2.0 Hi-Speed device for plugging a PC |
 |
| Ethernet 10/100 Mbit/s |
LPD, RawIP printing, SOAP web service, OPC UA, WebDAV, DHCP, HTTP/HTTPS, FTP/FTPS, TIME, NTP, Zeroconf, SNMP, SMTP, VNC |
| 1 USB host on the control panel for plugging |
a service key, an USB stick, USB WLAN stick, USB Bluetooth adapter |
| 2 USB hosts on the back of a unit for plugging |
a keyboard, barcode scanner, an USB stick, USB WLAN stick, USB WLAN stick with a rod antenna, USB Bluetooth adapter, external control panel |
| USB host, 24 VDC, for peripheral plugging |
 |
| Digital I/O interface providing 8 inputs and 8 outputs |
 |
| Operating data |
| Voltage |
100 - 240 VAC, 50/60 Hz, PFC |
| Consumption of power |
<10 W in standby / 100 W in typical operation / max. 200 W |
| Temperature / humidity: Operation |
+5 - 40°C / 10 - 85% not condensing |
| Storage |
0 - 60°C / 20 - 85% not condensing |
| Transport |
–25 - 60°C / 20 - 85% not condensing |
| Approvals |
CE, FCC Class A, ICES-3, cULus, CB, CoC Mexico, CCC, BSMI, BIS, KC-Mark |